Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides.
d1H7 (mm) | 16 |
---|---|
d2 (mm) | 32 |
l1 (mm) | 15 |
l2 (mm) | 65 |
bJS9 (mm) | - |
t (mm) | - |
admiss. Torque* at 100 min¹ (Nm) | 114,4 |
200 rpm | 110,5 |
300 rpm | 93,6 |
400 rpm | 71,5 |
500 rpm | 65 |
700 rpm | 55,9 |
800 rpm | 44,2 |
Weight (kg) | 0,29 |