Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides.
| d1H7 (mm) | 22 |
|---|---|
| d2 (mm) | 47 |
| l1 (mm) | 22 |
| l2 (mm) | 95 |
| bJS9 (mm) | - |
| t (mm) | - |
| admiss. Torque* at 100 min¹ (Nm) | 390 |
| 200 rpm | 260 |
| 300 rpm | 195 |
| 400 rpm | 143 |
| 500 rpm | 120,9 |
| 700 rpm | - |
| 800 rpm | - |
| Weight (kg) | 0,93 |
