Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides.
d1H7 (mm) | 22 |
---|---|
d2 (mm) | 47 |
l1 (mm) | 22 |
l2 (mm) | 95 |
bJS9 (mm) | 6 |
t (mm) | 24,8 |
admiss. Torque* at 100 min¹ (Nm) | 390 |
200 rpm | 260 |
300 rpm | 195 |
400 rpm | 143 |
500 rpm | 120,9 |
700 rpm | - |
800 rpm | - |
Weight (kg) | 0,93 |