Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides.
| d1H7 (mm) | 20 |
|---|---|
| d2 (mm) | 40 |
| l1 (mm) | 19 |
| l3 (mm) | 128 |
| l4 (mm) | 46 |
| bJS9 (mm) | 6 |
| t (mm) | 22,8 |
| admiss. Torque* at 100 min¹ (Nm) | 312 |
| 200 rpm | 221 |
| 300 rpm | 156 |
| 400 rpm | 117 |
| 500 rpm | 104 |
| 700 rpm | 93,6 |
| 800 rpm | - |
| Weight (kg) | 0,82 |
