Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C.
| d1H7 (mm) | 10 |
|---|---|
| d2 (mm) | 20 |
| l1 (mm) | 13 |
| l2 (mm) | 50 |
| bP9 (mm) | - |
| t (mm) | - |
| Torque max. (Nm) | 20 |
| Weight (kg) | 0,09 |
