Material: Steel C45, screw strength 12.9, zinc-plated. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C.
| Profil (mm) | KN 32 x 38 |
|---|---|
| Ausführung | 2 |
| A (mm) | 60 |
| d (mm) | 32 |
| L (mm) | 15 |
| Rmax. (mm) | 66,0 |
| Schraube (DIN 912) | M6 x 18 |
| Mutter sw (mm) | 10 |
| Gewicht (g) | 204 |
