Material: Steel. Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread. After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut.
passend zu DIN 1804 | M8x1 |
---|---|
d1H11 (mm) | 8 |
d2h11 (mm) | 20 |
s (mm) | 0,8 |
fc11 (mm) | 3 |
gH11 (mm) | 5,9 |
h (mm) | 2,5 |
Wellen-Nut nH11 (mm) | 3 |
Wellen-Nut t max. (mm) | 5,8 |
Gewicht (g) | 2 |