Material: Steel. Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread. After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut.
passend zu DIN 1804 | M24x1,5 |
---|---|
d1H11 (mm) | 24 |
d2h11 (mm) | 42 |
s (mm) | 1,0 |
fc11 (mm) | 6 |
gH11 (mm) | 21,6 |
h (mm) | 4 |
Wellen-Nut nH11 (mm) | 6 |
Wellen-Nut t max. (mm) | 21,5 |
Gewicht (g) | 7 |