Material: Steel, zinc-plated. These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part.
Nenngröße (mm) | 1,0 |
---|---|
Länge l (mm) | 25 |
d1 max. (mm) | 0,9 |
a min. (mm) | 0,8 |
b ca. (mm) | 3 |
c max (mm) | 1,8 |
passend zu Schraube Ø (mm) | 3,5 - 4,5 |
passend zu Bolzen Ø (mm) | 3 - 4 |
Gewicht per 100 Stück (g) | 21 |