Material: Steel, zinc-plated. These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part.
| Nenngröße (mm) | 1,2 |
|---|---|
| Länge l (mm) | 16 |
| d1 max. (mm) | 1,0 |
| a min. (mm) | 1,25 |
| b ca. (mm) | 3 |
| c max (mm) | 2,0 |
| passend zu Schraube Ø (mm) | 4,5 - 5,5 |
| passend zu Bolzen Ø (mm) | 4 - 5 |
| Gewicht per 100 Stück (g) | 15 |
