Material: Steel, min. strength 350 N/mm². These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965.
Type | KM 18 |
---|---|
d1 (mm) | M90 x2 |
Ø d2 (mm) | 120 |
Ø d3min. (mm) | 108 |
B (mm) | 16 |
b (mm) | 10 |
t (mm) | 4 |
x (mm) | 0,05 |
Weight (g) | 556 |