Material: Steel zinc-plated, Strength min. 350 N/mm2. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965.
Type | KM 8 |
---|---|
d1 (mm) | M40 x 1,5 |
Ø d2 (mm) | 58 |
Ø d3min. (mm) | 50 |
B (mm) | 9 |
b (mm) | 6 |
t (mm) | 2,5 |
x (mm) | 0,04 |
Weight (g) | 85 |