Material: Steel zinc-plated, Strength min. 350 N/mm2. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965.
| Type | KM 15 |
|---|---|
| d1 (mm) | M75 x 2 |
| Ø d2 (mm) | 98 |
| Ø d3min. (mm) | 90 |
| B (mm) | 13 |
| b (mm) | 8 |
| t (mm) | 3,5 |
| x (mm) | 0,05 |
| Weight (g) | 298 |
