#

Op voorraad

Filter artikelen

d1 (mm)

Minus Allowance d1 (mm)

Plus Allowance d1 (mm)

d2 (mm)

Allowance d2 (mm)

d3 (mm)

b1 (mm)

b2 (mm)

Weight (g)

Wis alle filters

Omschrijving

Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7

Op voorraad

Filter artikelen

d1 (mm)

Minus Allowance d1 (mm)

Plus Allowance d1 (mm)

d2 (mm)

Allowance d2 (mm)

d3 (mm)

b1 (mm)

b2 (mm)

Weight (g)

Wis alle filters

Artikelnummer
MAD/62386200
MAD/62386300
MAD/62386400
MAD/62386800
MAD/62386900
MAD/62387400
d1 (mm) Minus Allowance d1 (mm) Plus Allowance d1 (mm) d2 (mm) Allowance d2 (mm) d3 (mm) b1 (mm) b2 (mm) Weight (g)
40 +0,24 +0,36 44 +0,2 54 40 5 16,5
40 +0,24 +0,36 48 +0,2 58 40 5 30
40 +0,24 +0,36 50 +0,2 60 40 5 36
50 +0,3 +0,43 56 +0,22 70 50 5 34,5
50 +0,3 +0,43 60 +0,22 70 50 5 52
60 +0,34 +0,48 70 +0,24 80 60 5 74
Adviesprijs Prijs
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order
Toevoegen aan
order

Met een account kunt u makkelijk en snel bestellen, een overzicht van uw bestellingen en uw gegevens inzien.

Sluiten