Rubber-Metal Buffers CT, Zinc-plated

Omschrijving

Material: Metal parts: Steel, zinc-plated. Elastomer: Natural rubber hardness 55° Shore. Rubber-Metal buffers are simple, reasonably priced standard components used for elastic mounting. When shearing load occurs their load-bearing capacity is considerably lower than with pressure load. This has to be considered when horizontal mass forces or belt traction occur. The grade of rubber used has perfect physical properties. * Fperm. is the permissible static permanent load, which may be overlaid by a dynamic, alternating load. With shearing load please take care that no tension load in the rubber occurs at all during mounting. To achieve a sufficient fatigue strength provide some compressive pre-stressing. The stated permissible loads are only approximate, guideline values for the static load for "medium" rubber hardness. With particularly high, dynamic, alternating loads or high frequencies, the load figures have to be reduced accordingly. Temperature resistant up to 80°C.

Filter artikelen

D (mm)

H (mm)

G (mm)

I (mm)

Spring Rate CD average (N/mm)

Admissible Compressive Load F zul.* (N)

Shear Spring Rate CS average (N/mm)

Admissible Propulsive Load F zul.* (N)

Weight (g)

Wis alle filters

Artikelnummer

MAD/68572100

D (mm)	10
H (mm)	10
G (mm)	M4
I (mm)	4
Spring Rate CD average (N/mm)	30
Admissible Compressive Load F zul.* (N)	35
Shear Spring Rate CS average (N/mm)	4
Admissible Propulsive Load F zul.* (N)	20
Weight (g)	2

MAD/68572200

D (mm)	20
H (mm)	15
G (mm)	M6
I (mm)	6
Spring Rate CD average (N/mm)	65
Admissible Compressive Load F zul.* (N)	275
Shear Spring Rate CS average (N/mm)	10
Admissible Propulsive Load F zul.* (N)	35
Weight (g)	8

MAD/68572300

D (mm)	30
H (mm)	20
G (mm)	M8
I (mm)	8
Spring Rate CD average (N/mm)	130
Admissible Compressive Load F zul.* (N)	650
Shear Spring Rate CS average (N/mm)	25
Admissible Propulsive Load F zul.* (N)	85
Weight (g)	32

MAD/68572500

D (mm)	40
H (mm)	48
G (mm)	M8
I (mm)	8
Spring Rate CD average (N/mm)	145
Admissible Compressive Load F zul.* (N)	870
Shear Spring Rate CS average (N/mm)	80
Admissible Propulsive Load F zul.* (N)	130
Weight (g)	109

MAD/68572700

D (mm)	50
H (mm)	30
G (mm)	M10
I (mm)	10
Spring Rate CD average (N/mm)	200
Admissible Compressive Load F zul.* (N)	1000
Shear Spring Rate CS average (N/mm)	63
Admissible Propulsive Load F zul.* (N)	240
Weight (g)	72

D (mm)	H (mm)	G (mm)	I (mm)	Spring Rate CD average (N/mm)	Admissible Compressive Load F zul.* (N)	Shear Spring Rate CS average (N/mm)	Admissible Propulsive Load F zul.* (N)	Weight (g)
10	10	M4	4	30	35	4	20	2
20	15	M6	6	65	275	10	35	8
30	20	M8	8	130	650	25	85	32
40	48	M8	8	145	870	80	130	109
50	30	M10	10	200	1000	63	240	72

	Adviesprijs	Prijs
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order
				Toevoegen aan order

Filter artikelen

Omschrijving

Filter artikelen

Contact

Over ons

Klantenservice

Voorwaarden