Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05.
| Module | 1,5 |
|---|---|
| Tooth idth b (mm) | 15 |
| ha (mm) | 15 |
| h0 (mm) | 13,5 |
| Nominal Length L (mm) | 1000 |
| Nominal Length (mm) | 998,4 +/-0,3 |
| Weight (kg) | 1,56 |
