Op voorraad
d (mm)
D (mm)
L (mm)
L1 (mm)
L2 (mm)
M t (transferable at MA) (Nm)
P ax (at MA transferable) (kN)
Surface Pressure Shaft PW (N/mm²)
Surface Pressure Hub PN (N/mm²)
Clamping Bolts Size
Tightening Torque TA (Nm)
No. of Clamping Bolts
Weight (kg)
Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4.
Op voorraad
d (mm)
D (mm)
L (mm)
L1 (mm)
L2 (mm)
M t (transferable at MA) (Nm)
P ax (at MA transferable) (kN)
Surface Pressure Shaft PW (N/mm²)
Surface Pressure Hub PN (N/mm²)
Clamping Bolts Size
Tightening Torque TA (Nm)
No. of Clamping Bolts
Weight (kg)
Artikelnummer | ||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MAD/61570500
|
||||||||||||||||||||||||||
MAD/61570600
|
||||||||||||||||||||||||||
MAD/61570635
|
||||||||||||||||||||||||||
MAD/61570800
|
||||||||||||||||||||||||||
MAD/61570900
|
||||||||||||||||||||||||||
MAD/61571000
|
||||||||||||||||||||||||||
MAD/61571100
|
||||||||||||||||||||||||||
MAD/61571200
|
||||||||||||||||||||||||||
MAD/61571400
|
||||||||||||||||||||||||||
MAD/61571500
|
||||||||||||||||||||||||||
MAD/61571600
|
||||||||||||||||||||||||||
MAD/61571700
|
||||||||||||||||||||||||||
MAD/61571800
|
||||||||||||||||||||||||||
MAD/61571900
|
||||||||||||||||||||||||||
MAD/61572000
|
d (mm) | D (mm) | L (mm) | L1 (mm) | L2 (mm) | M t (transferable at MA) (Nm) | P ax (at MA transferable) (kN) | Surface Pressure Shaft PW (N/mm²) | Surface Pressure Hub PN (N/mm²) | Clamping Bolts Size | Tightening Torque TA (Nm) | No. of Clamping Bolts | Weight (kg) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
5 | 16 | 11 | 10,5 | 13,5 | 6 | 2 | 150 | 55 | M2,5 x 10 | 1,2 | 3 | 0,012 |
6 | 16 | 11 | 10,5 | 13,5 | 9 | 3 | 184 | 69 | M2,5 x 10 | 1,2 | 3 | 0,012 |
6,35 | 16 | 11 | 10,5 | 13,5 | 10 | 3 | 180 | 72 | M2,5 x 10 | 1,2 | 3 | 0,012 |
8 | 18 | 11 | 10,5 | 13,5 | 12 | 3 | 141 | 62 | M2,5 x 10 | 1,2 | 3 | 0,015 |
9 | 20 | 13 | 12,5 | 15,5 | 17 | 4 | 132 | 60 | M2,5 x 12 | 1,2 | 4 | 0,020 |
10 | 20 | 13 | 12,5 | 15,5 | 19 | 4 | 120 | 60 | M2,5 x 12 | 1,2 | 4 | 0,019 |
11 | 22 | 13 | 12,5 | 15,5 | 21 | 4 | 108 | 54 | M2,5 x 12 | 1,2 | 4 | 0,024 |
12 | 22 | 13 | 12,5 | 15,5 | 24 | 4 | 102 | 55 | M2,5 x 12 | 1,2 | 4 | 0,022 |
14 | 26 | 17 | 16,5 | 20,0 | 40 | 6 | 94 | 50 | M3 x 16 | 2,1 | 4 | 0,039 |
15 | 28 | 17 | 16,5 | 20,0 | 44 | 6 | 93 | 50 | M3 x 16 | 2,1 | 4 | 0,044 |
16 | 32 | 17 | 16,5 | 21,0 | 86 | 10 | 158 | 79 | M4 x 16 | 4,9 | 4 | 0,067 |
17 | 35 | 21 | 20,5 | 25,0 | 88 | 10 | 116 | 56 | M4 x 20 | 4,9 | 4 | 0,090 |
18 | 35 | 21 | 20,5 | 25,0 | 94 | 11 | 110 | 57 | M4 x 20 | 4,9 | 4 | 0,087 |
19 | 35 | 21 | 20,5 | 25,0 | 99 | 11 | 104 | 56 | M4 x 20 | 4,9 | 4 | 0,080 |
20 | 38 | 21 | 20,5 | 26,0 | 179 | 17 | 169 | 89 | M5 x 20 | 10 | 4 | 0,100 |
Adviesprijs | Prijs | |||
---|---|---|---|---|
|
Toevoegen aan
order |
|||
|
Toevoegen aan
order |
|||
|
Toevoegen aan
order |
|||
|
Toevoegen aan
order |
|||
|
Toevoegen aan
order |
|||
|
Toevoegen aan
order |
|||
|
Toevoegen aan
order |
|||
|
Toevoegen aan
order |
|||
|
Toevoegen aan
order |
|||
|
Toevoegen aan
order |
|||
|
Toevoegen aan
order |
|||
|
Toevoegen aan
order |
|||
|
Toevoegen aan
order |
|||
|
Toevoegen aan
order |
|||
|
Toevoegen aan
order |
Turfschipper 27
2292 JC Wateringen
Nederland
Met een account kunt u makkelijk en snel bestellen, een overzicht van uw bestellingen en uw gegevens inzien.
Sluiten